Fork Brace Measurement Worksheet
 |
| 1. Center to center of forks (you can
measure between the two fork tubes and add the diameter
of one fork tube to get this) 2. Diameter at top of slider (below the dust cap) 3. Diameter of section covered by dustcap 4. Diameter of fork tube 5. Distance from top of fender to TOP of slider. NOTE: your fender may be higher than the sliders, specify - if below, + if above 6. Height of dustcap area including groove. 7. Height of groove. 8. Diameter of groove. |
Tkat's forkbraces can be seen here
Measurements and inquiries should have "F/B"
as the subject line.
Include year and model and send your measurements to Tkat